79-95 Toyota 3-Hole Spring Perch Kit For 79-95 Pickup 85-95 4Runner Trail Gear 79-95 Toyota 3-Hole Spring Perch Kit For 79-95 Pickup 85-95 4Runner Trail Gear Trail Gear Three Hole Spring Perches. When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches and weld in a new set at the proper angle. 3 holes on top. Normally the spring pin is installed in the center hole but you can also move the rear axle forward or backward 1.0 Inch by using the optional holes. Made from 0.25 Inch plate steel. Unpainted finish.Specs: Warranty: 12 Month Limited Warranty Sold As: Pair Material: Steel Finish: Bare Color: Grey Location: Rear Fits: 1979-1995 Toyota Pickup, 1985-1995 Toyota 4Runner

79-95 Toyota 3-Hole Spring Perch Kit For 79-95 Pickup 85-95 4Runner Trail Gear

Code: 110028-1-KIT-FLCL

Three Hole Spring Perches. When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches and weld in a new set at the proper angle.

3 holes on top. Normally the spring pin is installed in the center hole but you can also move the rear axle forward or backward 1.0 Inch by using the optional holes. Made from 0.25 Inch plate steel. Unpainted finish.
Specs:

  • Warranty: 12 Month Limited Warranty
  • Sold As: Pair
  • Material: Steel
  • Finish: Bare
  • Color: Grey
  • Location: Rear
  • Fits: 1979-1995 Toyota Pickup, 1985-1995 Toyota 4Runner

Three Hole Spring Perches. When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches and weld in a new set at the proper angle.

3 holes on top. Normally the spring pin is installed in the center hole but you can also move the rear axle forward or backward 1.0 Inch by using the optional holes. Made from 0.25 Inch plate steel. Unpainted finish.
Specs:

  • Warranty: 12 Month Limited Warranty
  • Sold As: Pair
  • Material: Steel
  • Finish: Bare
  • Color: Grey
  • Location: Rear
  • Fits: 1979-1995 Toyota Pickup, 1985-1995 Toyota 4Runner